810Pi is a new CNC controller with built-in PLC and HMI integrated based on a powerful RISC DUAL CORE 32bit processor.

medes-cnc-milling-controller

Specifications:

65000 colors 10 inch touch screen display
Equipped with Power-i motherboard
70 buttons for user friendly operation
Connect to additional panel and hand wheel for better control and easier machine and axis operation
Support Expansion i/o card up to 900 digital i/o
Able to control 8 axis
4 axis  interpolation
12 Axis type supported: Pulse/Dir , Analog Close loop or Can-Open at same time
2 Serial port with Modbus and open protocol for programming
12 Axis type: Pulse/Dir , Analog Close loop or Can-Open at same time
7 general purpose analog input
16 Digital input and 16 digital output in local port
4 open loop pulse output axis for servo and stepper up to 500KHz
4 close loop axis with analog output and encoder input
Support modbus TCP
2 USB port

Applications:

Punching CNC machine

Dimensions:

Back view

To find cutting dimensions on electrical enclosure refer to catalog

Front view

Connects to electrical enclosure with 6 screws

Accessories:

تجهیزاتی که به کنترلر متصل می گردند:

PCS-16MCO-NT1

این کارتها دارای چهار مدل می باشندکه ترکتیب آنها 32 ورودی ،32 خروجی و 16 ورودی و...

PCS-16MCX-NS1

این کارت دارای 12 ورودی دیجیتالی و 4 ورودی آنالوگ تا 5 ولت می باشد. علاوه بر...

PCS-16MCI-NS1

This card has 12 digital and 4 analog - 5 volts inputs. Besides these inputs it is...

MCP4232MC-AA

MCP4232MC-AA is the new Machine Control Panel that equipped with 42 buttons and 32 LED that show...

MCP4232MC-AB

MCP4232MC-AB is the new Machine Control Panel that equipped with 42 buttons and 32 LED that show...

EP40 manual probe

EP40 used for manual measuring tool and work piece. Functions Work piece set-up and inspection Datum positions...

TTC200 tool measuring sensor

Automatic setting of parameters for the cutting tools on the CNC machines Automatic measuring the wear or...

simple wired handwheel

Introduction: Pars Automation hand wheels are manual pulse generators that used for positioning of axis on CNC...

WHB04B-4 wireless hand wheel

معرفی: هندویل بیسیم سری WHB04B-4 با قابلیت اتصال به کنترلر های Tex سری Power بصورت وایرلس و...

BWGP01-5AA wirelesshand wheel

معرفی: هندویل بیسیم سری BWGP01 دارای یک گیرنده بیسیم می باشد که مانند هندویل های سنتی به...