Power Z is a new motion controller includes simple and basic functions of Motion Control, PLC and a 7” 56K colors touch screen . with a powerful dual core RISC 264 Mhz processor. Thanks to the digital and analog I/O and to its wide connectivity like CANopen, Modbus RTU and Ethernet (in Client/Server, FTP or WEB server mode) Power Z is suitable for applications where it’s necessary to contain costs maintaining high performances. Connectivity offers the opportunity to supervise and control functions of machines and plants with also the possibility to collect data on field from different kinds of sensors. using a low cost I/O expansion board connected through I/O modules connected via CANopen.
Power Z manages the positioning of one axis in analog +/-10V with position feedback provided by incremental encoder and three Step Dir axis.
The exchange of data between the HMI and the PLC is quick and direct, unlike the traditional method of variables interchange. At the back of the controller an USB connector is available. It is possible to store and upload data, formulas, programs and firmware.
Power Supply 24Vdc
7" color display
Dimensions 243x146x45 (LxHxP in mm)
1 MB sram
8 MB flash on microcontroller
10 digital inputs 24Vdc
8 digital outputs 24Vdc 0,35A protected
2 digital outputs 24 Vdc 0.05 A
3 analog inputs 0.5V
1 RS232 port (RS485 optional)
1 ETHERNET port
1 USB 2.0 on rear side (optional on front panel)
1 line driver encoder 5V (on request Push Pull)
1 analog output +/-10V
3 PWM or STEP/DIR output (single line signals, not interpolated axes)
1 Can open port for I/O expansion
1 SPI Port for INT-SPI (16I+16O expansion board)
different positioning, saw machines, wrapping machines, spray booths, supervision systems, shoes and leather machines, many different kinds of special machines, and all the applications which require a low cost, flexible and reliable PLC with HMI.
bellow products use as remoute IO and user able to extend io to mre than 1024 io.