TexTurn is a Product for Lathe and Turning Application that consisting of a full range of hardware and software solutions.
Why TexTurn is the Best for Turning Application?
- Powerful Motion Commands
- user-friendly Interface and easy Operation in TexMill
- different type of Diagnostic Function
- advanced Programming Function
- Tool and Turret Function
- built in advanced Function
- different configuration for any desire
Some specification of TexTurn:
Advanced Cornering Strategy
Cornering strategy help system to increase machining with a high speed and lower tolerance.
The S-curve changed profile for smooth acceleration and deceleration and minimizes vibration and shock.
With backlash compensation function mechanical backlash that user fined in Ball screw set in parameter. For any axis one parameter prepared.
Pitch error compensation
The pitch error information that measured by a separate laser measuring system saved in pitch error parameter. Correction values applied to axis during movement. There is two type for data input for correction parameters. Start point and many distance or start point and one step and number of steps.
Function buttons on the bottom of the screen can be freely arranged by user and assigned defined function to theme in “screen setting” (by F4 on setting menu). For “run, hold, main, jog, step and MDI mode there is ready to use.
Full backup restore function
with Full backup/restore function operator can create a backup form parameter, setting, programs and even firmware. With restore function when changing to e new controller, making replacement is easier just in some minute. There are many ways for creating backup like use USB disk directly from controller or using TexMill software under windows with a user-friendly interface. There is many ways for monitoring like Ethernet and GSM modem connection. remote monitoring function manage all programs, parameters and data of the controllers. With touch screen keyboard (soft key board) operator can work with machine without any extra hardware or external keyboard. These keyboard displayed like pop-up window over screen.
all ISO g code standard for motion, coordinate, tool offset and ... supported by TexTurn. For more detail about other g code and m code refer to “operation manual”. With an open BLC platform user can add any cycle. Just type cycle(for example G84) in program editor , a popup window will be displayed and operator need to insert value. With its graphical interface complex cycle creation is easy for every one.
Parametric programing powered TexMill to create complex program just in a few line by using mathematical library that support floating calculation 32 bit and 64 bit. All mathematical (like sin, cos, tan, square root and …) , conditional (like if, go to and …) and many other instruction support.
TexTurn support many function for Turret and Tool change like measurement, life cycle, automatic tool change, table protection, length measurement and radius measurement and many other functions. operator can work and managed tool.
Tool turret function
It is possible to defined for every tool holder one sensor to detect present of tool in tool holder. This function prevent from operator mistake to put a tool on a full tool holder and protect from tool damage or accident tools with tool magazine.
Use compact series with PC
In this type system consist of one PC (or Laptop) and one compact controller that contain LCD monitor and Box control in one package that integrated with “TexMill Controller” version. Also in PC user install “TexMill PC version” All features of “TexMill controller version” and “TexMill PC version” supported. Controller LCD with 7”, 10” and 15” is available and about PC any LCD size supported.
TexTurn designed to support all type of lathe and turning CNC machine