محصولات

سی ان سی
لوازم جانبی
پنل جانبی
MCP4232MC-AA
MCP4232MC-AB
MCP1204CC07
MCP4232CC-AA
هندویل
هندویل بیسیم WHB04B-4
هندویل 4 محور فرز
هندویل بیسیم BWGP01-5AA
نگهدارنده مشعل پلاسما
پراب اندازه گیری ابزار
پراب منوال اندازه گیری ابزار EP40
سنسور اندازه گیری طول ابزار TTC100
سنسور اندازه گیری طول ابزار TTC200
محور z پلاسما
کنترلر ارتفاع تورچ
کنترلر ارتفاع هواگاز استاندارد
کنترلر ارتفاع هواگاز تحت شبکه
کنترلرهای فرز
607ML
607Mi
607Mj
810Mi
TexMill
کنترلرهای برش
607CL
607Ci
810Ci
TexCut
کنترلرهای پانچ
TexPunch
607PL
810Pi
اتوماسیون صنعتی
RTU های صنعتی
CanOpen
PCS-16ECI-NS1
PCS-16MCX-NS1
PCS-16ECO-NT1
PCS-16MCI-NS1
PCS-16MCO-NT1
استپر موتور و درایو
استپردرایو دوفاز
LW3D3032N0A1-00
LW1D3050N081-00
LW1D3050N081-01
LW3D3070N0A1-00
استپردرایو سه فاز
LWCD3032N0A1-00
LWCD3070N0A1-00
پی ال سی (PLC)
اسکادا
مانیتور های صنعتی (HMI)
PAC
Power-Z
سروو موتور و درایو
اینورتر - درایو سرعت متغیر
اینترنت اشیاء (IOT)
مانیتورینگ
روتر سلولار صنعتی
سنسور های بیسیم
الکترونیک
کیبورد صنعتی
مبدل های الکترونیکی
مبدل NPN به PNP
مبدل PNP به NPN
مبدل Linedriver به PNP
مبدل TTL به Linedriver
برد مقسم ولتاژ
مکاترونیک
ماشین آلات
ماشین های خاص و سفارشی
محور دورانی برش هواگاز و پلاسما
ماشین فرز
گیربکس صنعتی
محور خطی
ربات
ربات کارتزین
ربات دلتا
ربات اسکارا
اتوماسیون ساختمان

LWC is a new line of vectorial drives belonging to the Titanio family, characterised by innovative performance. Built by integrating the new‘Else - Error Less Servo Efficient technology’, with the accurate control of the sinusoidal current, these drives allow to command stepper motors with a drastic noise reduction, less heating and extremely smooth movements. Suitable for driving 3-phase hybrid stepper motors, they can be coupled mainly with the series of motors from 0.8” to 3.4”. Completely digital and made using Arm Core M4 technology, LW3 drives offer exceptional reliability combined with mechanical compactness and a competitive price. They can be used in many types of machines where there is already a controller for the generation of digital clock & direction signals, such as X-Y tables, labelling machines, laser cutters, pick-place devices, engraving tables, etc. and they are recommended in all applications in which not only versatility, precision and speed are required, but also smooth and silent movements as in the medical field.

مشخصات کلی:

Power supply voltage24 [Vcc] ÷ 80 [Vcc]
Output current1.7 [A/ph rms] ÷ 7.1 [A/ph rms] 2.4 [A/ph peak] ÷ 10.0 [A/ph peak]
Interface control modeClock & Direction
Power stageH-bridge chopper bipolar at 40 kHz.
Digital inputs4 optocoupled inputs 2 - 24Vdc 2 MHz compatible NPN or PNP or Line Driver.
Digital outputs1 digital output 24 Vdc - 100 mA for fault.
Open or Close loop Open loop
Step resolutionFrom 200 up to 51200 step/revolution (emulated).
Safety protectionsOver/Under voltage, Over Current, Over Temperature, Short Circuit Phase/Phase and Phase/Ground.
Status monitoring3 Leds with guiding light (green and red/yellow).
Operative temperature 0 [°C] ~ 50 [°C]
Storage temperature 0 [°C] ~ 55 [°C]
Humidity 0 [%] ~ 90 [%]
Protection classIP20
Dimensions H x L x W 30.0 [mm] x 128.0 [mm] x 74.0 [mm]
Weight 0.29 [Kg.]

Down load

Principal features

  • Sensorless motor stall detection
  • Integrated diagnostics
  • Motor short-circuit protections, open phases, over and under voltage and temperature
  • Vector control: the sinusoidal regulation with‘Else’ technology keeps the motor torque constant, allowing smooth and silent movements
  • Smooth movements
  • Compact size
  • Silent rotation
  • Reliability
  • Low EMC emissions
  • Software resonance damping
  • Auto-tuning of the motor control parameters
  • High efficiency current regulation
  • Reduction of motor temperatures
  • Digital inputs from 2 to 24 Vdc
  • Fast and easy installation

Functions

  • Selection of the number of step/revolution by means of roto-switches. In order to maintain compatibility with traditional drivers, the number of step/revolution have been emulated through software, the current regulation is always sinusoidal.
  • Selection of the number of step/revolution by means of roto-switches. In order to maintain compatibility with traditional drivers, the number of step/revolution have been emulated through software, the current regulation is always sinusoidal.
  • Possibility to select five user functions:
  • 1 - enabling of motor stall detection. Reading the motor BEMF, LWC drivers detect without encoder the step loss, showing alarm status with the Fault digital OUT and a LED sequence.
  • 2 - Step/Direction or Clock-Up / Clock-Down control mode.
  • 3 - enable input management (safety control).
  • 4 - 30% or 70% automatic current reduction (still motor).
  • 5 - enabling of “Clock Test” function, useful during the driver’s installation, which shows the right presence of the clock signal through status LED flashing.